How to store the elevator correctly:

一，應該停在干燥的環境。如果你不得不在外面停下來，你應該選擇一個平坦的地面鋪上木板。停車后用防水蓋布覆蓋。

1、 It should be stopped in a dry environment. If you have to stop outside, you should choose a flat ground and pave it with boards. After parking, cover it with waterproof cloth.

固定剪叉升降貨梯

Fixed scissor lift cargo elevator

二，在長期停機和儲存之前，必須對機器進行維護，對損壞的零件進行修理，并徹底清洗，以保持良好的技術狀態。

2、 Before long-term shutdown and storage, the machine must be maintained, damaged parts must be repaired and thoroughly cleaned to maintain good technical condition.

三，機場的布置和布局應保證任何機械的進出不受其他機械的影響。

3、 The layout and layout of the airport shall ensure that the access of any machinery is not affected by other machinery.

四，機械燃油操縱桿應置于怠速位置，每個操縱桿都處于空檔位置。

4、 The mechanical fuel control lever should be in the idle position, and each control lever should be in the neutral position.

五，發動機儲存。

5、 Engine storage.

清潔發動機中的冷卻水。升降貨梯是一種多功能升降機械設備，可分為固定式和移動式、導軌式、曲柄臂式、剪刀式、鏈條式、裝卸平臺式等。電梯通常用于救援和裝飾。

Clean the cooling water in the engine. The cargo elevator is a multifunctional lifting mechanical equipment, which can be divided into fixed and mobile, guide rail, crank arm, scissors, chain, loading and unloading platform, etc. The elevator is usually used for rescue and decoration.

更換發動機機油。新機油通常是中性的，不會腐蝕發動機的金屬部件。

Change the engine oil. The new oil is usually neutral and will not corrode the metal parts of the engine.

給油箱加滿柴油，以免油箱生銹。如果條件允許，還應該添加防腐劑。

Fill the fuel tank with diesel to avoid rusting. If conditions permit, preservatives should also be added.

在液壓升降機停機期間，發動機應每月啟動一次，以使機器能夠短距離運行，從而在每個零件的潤滑部分建立新的油膜，以防止生銹。應該注意的是，冷卻水應該在啟動前注滿，冷卻水應該在結束時排出。

During the shutdown of the hydraulic elevator, the engine should be started once a month to enable the machine to run for a short distance, so as to establish a new oil film on the lubricating part of each part to prevent rust. It should be noted that the cooling water should be filled before starting, and the cooling water should be discharged at the end.